ORGON ENERGY COLLECTION SYSTEMS -------------------------------- This drawings are illustrations of interconnection between orgon accumulators for use in ITM processes. The Orgon accumulator consist of different layers with organic and inorganic materials arranged so that a organic layer lays on a inorganic level and so on. The inorganic material consist normally of pure iron. The iron must be the inner layer and the organic the outher layer. In certain systems is it important to have a insulating layer between the organic and the inorganic material. This insulating layer can consist of glaswool or stonewool. The organic layer usually consist of a wood sort. If the outher organic layer has fins,will the total aerial of this layer increase,and with that the orgon energy collecting capacity. It could be interesting to put cone cylinders on the organic material consisting of the same material. This could increase the collecting capacity further. From a energetic view it could be favourable to have vertical bares on the other layer. This would be the case in certain constellation dependent of geographical placement and so on. It could be favourable to daisy chain several orgon accumulators to increase the intensity of the output orgon force. This is a parallel to that of daisy chain several batteries to increase the voltage. The daisy chaining is done by using tubes of pure iron or wires who can conduct energyplain 2 forces. A valve who directs the energyflow is necessary. This valve is placed in the tubes between the daisy chained orgon accumulators. The valve consist of a cone structured device of organic material whit a iron ring at it's thigheds end. The iron ring lay around a hole at the cone end. The energy stream moves from the widest against the thigheds part of the cone inside it. It can also work,making the entire hollow cone consist of pure iron. The most favourable placement is to put the daisy chained orgon accumulators vertically over each other in a tower formation. This formation eliminate that the shadow of one accumulator cover another accumulator. At the top of the highest placed accumulator could it be favourable to place a correctly tuned pyramid of organic material. This pyramid can cause the power to be pressed with increased force down through the structure. By placing a globe of rock crystal inside the top accumulator at the pyramids mirror focus can amplify the effect further. It would be an advantage that the orgon accumulators have a multilayer structure of organic and inorganic materials. The daisy-chained tower structure can consist of orgonaccumulators with the same size,or with the biggest accumulator at the bottom,and the smallest at the top. The last configuration is actual with big constructions.